Charges for infrastructure over and above standard requirements are given in Section 45 Part 1 These charges include work on internal trunking & traywork; breaking through walls; additional poles, ducts and cables; radio charges and miscellaneous non-standard or specially requested items. Site connection fees are required where 2Mbit/s line plant is required to provide service. As such connection charges are subject to site survey. Details of the Site connection fees applicable are contained in Section 12 Part 4 These charges are in addition to those quoted below. KiloStream Ns between 128kbit/s and 640kbit/s normally do not require 2 Mbit/s line plant, except where the site is too far from the serving exchange, or there are copper limitations. KiloStream Ns over this speed will always require a 2 Mbit/s path at a new site.

If service is required at a Non-Served premises. See Section Part 5

KiloLine N (Standard):

KiloLine N 128kbit/s and 256kbit/s - £1250.00(d)

KiloLine N 512kbit/s - £1500.00(d)

For each KiloLine N circuit end routed over KiloStream N Bearer a connection charge of £1000.00 applies.

For KiloLine N (Bearer System) See Part 3 for Bearer charges.

As of 28 October 1997, KiloStream Bearers are no longer available for new supply and KiloStream Plus and KiloStream N Bearer circuits can only be provided to fill excess capacity on existing bearers.

The following table shows the annual rental charges for KiloLine N circuits to Republic of Ireland (a).

The following table shows the annual rental charges for KiloLine N circuits to the Channel Islands. KiloLine Circuits to Jersey were FULLY WITHDRAWN from 31 December 2008. (b)

KiloLine Bearer System circuits and KiloLine Circuits to Guernsey, where Site Fee has been paid are withdrawn from New Supply with an effective date of 1st February 2009.

The following table shows the annual rental charges for KiloLine N circuits to Kingston Upon Hull.

KiloLine Bearer System circuits and KiloLine Circuits to Kingston Upon Hull, where Site Fee has been paid are withdrawn from New Supply with an effective date of 1st February 2009.

NB. For allocation of billing codes for required price ring 020 7932 7391.

Conversion from KiloStream N and KiloStream N Bearer individual provision to KiloStream N Aggregate Interface (ITU-T- G703/4) can be carried out for a single payment charge of £1635.00.

This charge covers the cost of changing to aggregate interface and reconnecting the associated KiloLine N circuits to that specific aggregate interface, if carried out at the same time. Moving circuits to or from the associated KiloStream Bearer on other occasions will incur the associated Re-termination charge.

Termination of circuits/channels to either KiloStream Aggregate Interface (ITU-T-G. 703/4) or to individual terminations as required by the customer can be carried out for a single payment charge of £109.00.

If this work is not done at the same time as the conversion to KiloStream N Aggregate Interface, a visit charge may be applicable in addition (see Section 15, Part 7).

Where there is no existing usable line plant there is an additional charge for connection of line plant. For details on the charges raised please refer to Section 12 Part 4 detailing Singleton and Multiple site connection fees.

Customers wishing to change from KiloStream Aggregate Interface to individual circuit terminations will be required to pay the additional KiloStream Bearer connection charge and the connection charge for each KiloStream circuit routed over the KiloStream Bearer.

The charge for Upgrade of 75 Ohm unbalanced ITU-T-G703/4 (BNC) to 120 Ohm balanced ITU-T-G703/4 (RJ45) interface per 2Mbit/s end is £325.00.

NBFor customers with newer G703/4 equipment who require upgrading by software changes only, Timescale rates will apply instead (see Section 15, Part 7)